Three-blade interface saw for sanitary ware materials Three tungsten carbide alloy saw blades comprise combined cutting tool. Tenon port can be milled correctlly on sanitary ware or curtain wall through once cutting stroke. the milling cutter can be adjusted at up-down direction and anterior-poster dircetion according to the needed size of tenon port. The vertical blade can be half increased for use in notch and cut off. Therefore, the processing scope is wider. The suitability is wide and productivity is high.
Main Technical Parameter
size of material table : 500 x 320mm
maximum cutting stroke : 950mm
power of main motor(cutting saw blade with seam hook) : 3 x 2.2kw
rotation speed of blade axis : 2840r/min
millabler each time : 10~12pieces
operation pressure of oil cylinder for swaging : 0.6~0.65Mpa
dimension fo level saw blade
(outer diameter*inner hole*thickness) : 300 x 30 x 4.2
dimension of vertical saw blade (outer diameter x inner hole x thickness) : 300 x 30 x 3.2
overall dimension(L x W x H) : 2200 x 1040 x 1640mm